|
Burak Acar
Nav. Arch., MSc.,
PhD.
Burak Acar graduated from Istanbul Technical University, Faculty
of Naval Architecture and Marine Engineering as a “naval architect
and ocean engineer” in 1998. He got his Master of Science
degree from the same department in 2001 and got his PhD degree
from Dokuz Eylul University,
School of Maritime Business and Management.
He has worked in a project at University of New Orleans, USA in
2001 which was "Implementation of Six Sigma System at shipyards
and Using Quality Systems for Increasing Efficiency and
Profitability".
He gives"ship construction and stability" lectures at Dokuz
Eylul University, in the School of Maritime Business and
Management.
He has been the president of the Chamber of Naval Architects and
Marine Engineers of Turkey, Izmir Branch, between 2001 and 2005.
His main field of interest is designing yachts and small crafts.
He has been designing yachts and small crafts since 1998. There
are many realised designs of Burak Acar. Some of his latest projects
that have met the sea
are 35 m steel sailing yacht, 14 m steel motoryacht, 6
m GRP speed craft, 7.20 m GRP power boat, 8.60 m fiberglass trawler,
8.50 m GRP motorboat, 13 m steel fishing boat, 16 m Gulet (Traditional
Turkish Sail Boat) and 18 m Dailiy Passenger Trip Boat.
He recently works on
military boats and service
boats design and engineering.
He has experience in yacht design, haydrostatics and stability
calculations, 3 D Modelling, speed-power estimations, CE
documentations and calculations and shipyard management
strategies.
|
Bulent Aysul Nav. Arch.
2007-… POSEIDON Ltd. (www.poseidonltd.com)
Consultant Engineer
Consultancy in boat design.
2007-… TURKMARITIME (www.turkmaritime.com)
Project Engineer Role
Project management and supervision of construction of a 26m
steel stern trawler.
2004-2006 ERAS Marine (www.erasgemi.com)
Design and Consultant Role
Designs of some steel commercial boats like fast pilot
boats, fishing vessels.
2004-… BALDEN Marine (www.baldendenizcilik.com)
Technical Management, Design, Consultant and Partnership Role
Project costing studies, supervising of production process,
all design issues.
2004-… ARL Yachts
Technical Management Role
Project costing studies, supervising of production process,
all design issues.
2001-2004 SES Yachts (www.sesyachting.com)
Technical Management and Design Role
Project costing studies, supervising of production process,
conseptual and detail design.
1999-2001 TORLAK Shipyard (www.torlakshipyard.com)
Field Engineer Role
Supervising of production process.
1998-1999 TUZLA Shipyard (www.torlakshipyard.com)
Field Engineer Role
Supervising of production process.
EDUCATIONAL QUALIFICATIONS
1993-2002 Licence Degree in Naval Architecture
Istanbul Technical University, Istanbul, Turkey
Academic education on Naval Architecture & Marine
Mechanics. Started working in shipyards in 1998. |
|
Abdi Kukner
Nav. Arch.,
PhD.
Nav. architect and marine engineer. Born in Mersin, Turkey in
1952.
Academic Career:
9/80 - 9/84
Stevens Institute of Technology
Castle Point Station
Hoboken, New Jersey 07030, U.S.A.
Ph.D.
in Ocean Engineering
9/78 - 2/80
University of California
Berkeley, California 94710, U.S.A.
Master of Science,
Naval Architecture
9/75 - 6/77
İ.T.Ü. Faculty of Nav. Arch. and Ocean Eng.
Master of Science,
Naval Architecture
9/71 - 6/75
İ.T.Ü. Faculty of Nav. Arch. and Ocean Eng.
BSc,
Naval Architecture
Lectures Given:
Numeric Analysis
Computational Fluid Mechanics
Wave Mechanics
Dynamics of Marine Structures
Computer Programming
Dynamics of Sea Waves
The Sailing Yacht
Construction of small crafts
Abdi Kukner is expert in:
Ship design and construction
Yacht design
Ship / yacht hydrodynamics
Wave mechanics
Fluid mechanics
Memberships:
Chamber of Naval Architects and Marine Engineers of Turkey
(He is on the board of chamber at the moment)
Chamber of Mechanical Engineers of Turkey
Society of Naval Architects and Marine Engineers (SNAME)
Abdi Kukner works as a consultant naval architect for
POSEIDON and carries out the theoretical experiments and
calculations during design phases.
|
Wilfred
Heiner
Mechanical Engineer
Technical
¨
Developed new products, production methods and
techniques.
¨
Developed production processes in different
industries
¨
Educate workers to make production processes more
cost effective.
¨
Developed test methods for mechanical and
electrical issues.
¨
Improved production methods and processes
Analytical
¨
Developed a new plan for high level consumer
services.
¨
Improve production processes by finding
constrains and bottle necks in the production process.
¨
Trouble shooter with high technical skills in
mechanical constructions and electric systems.
¨
Develop financial building plans for yacht
building.
Professional Experience
Partner in Bobkat international,
England
2008 - present
Technical Manager Dutch
Bay
2006 - present
HNS BV,
director
2002 - 2005
Cordis Europa NV, R&D engineer,
MRI
2000 - 2002
Biosence Webster, R&D engineer,
Cryo and electrophysiology
1998 - 2000
Cordis Europa NV, R&D engineer,
technology
1994 - 1998
Cordis Europa NV, engineer,
transfer R&D to production
1992 - 1994
Kiestra Instrument makers,
Product development engineer
1990 - 1992
International Experience
¨
Set up production for sport boats and commercial
crafts.
¨
Set up a new Ship yard in the Anytalya Free Trade
Zone..
¨
Negotiation for importing products from China,
USA and Europe.
¨
Implementation of new documentation in a
production plant in France.
¨
Transfer of new products and technologies to the
USA and France.
Education
HTS Leeuwarden
Bachelor medical
engineering
1997 – 1998
HTS Groningen
Vacuüm
technology
1996 -1997
HTS, PBNA
Mechanical
engineering
1992 – 1994
MTS,
Leidse Instrument makers school,
High precision instruments
engineering
1988 – 1990
MTS,
Zwolle
Mechanical
engineering
1986 - 1988
And many other job related
courses.
Community
Involvement
Chairman of a local event
organization office
2004 – 2006
|
